PoE Injector Input/Output RJ45 10/100/1000 Mbps Power 30 W

Power over Ethernet injector up to 30W (PoE+). Gigabit.

Quick and easy solution that allows remote power supply to a network device, for example an IP camera, using the same cable used for the network connection. Simply connect the network cable to the RJ45 input of the injector along with the power supply, thus obtaining the data flow and the power supply voltage through the same Ethernet cable that we will connect to the RJ45 output of the injector.

This injector's Power over Ethernet (PoE/PoE+) is IEEE 802.3af/at compliant and self-determines the power needs of the powered device. Up to a maximum of 30W per single connection over a Cat 5E UTP cable or higher. It is useful up to a maximum distance of 100 meters (restricted by data transmission), allowing the installation's power supplies to be located in a single, centralized point. Stable and secure thanks to different protections against overvoltages, current peaks or short circuits.

Allows data transmission rates of 10/100 Mbps Half-Duplex and 100/1000 Mbps Full-Duplex.

• Interface: 10/100Mbps RJ45 Input/Output
• Power supply: 0 W (Max. 46~52 VDC)
• PoE characteristics: According to IEEE 802.3af/at standard
• Maximum range: 100 meters
• Operating temperature: 0º C - 40º C
• Dimensions: 165 (D) x 38.5 (H) x 62 (W) mm