// ENTRY NEWS
USB-C to 3.5 mm jack adapter: when you need one with a DAC
You have a new phone, your wired headphones still work fine, and there is nowhere left to plug them in. A USB-C to 3.5 mm jack adapter solves that, but two almost identical adapters can behave very differently: some have a DAC that converts the phone's digital audio, while others only pass through an analogue signal that many phones no longer provide.
The short answer: if you have an iPhone with USB-C, a Google Pixel or a recent Samsung Galaxy, you need an adapter with a DAC, also called an active adapter. Before buying, also decide whether you want to use the microphone and whether you will charge while listening: these are three separate requirements.
What a DAC is and why it decides whether you get sound
DAC stands for digital-to-analogue converter. It takes the digital audio coming out of the USB-C port and turns it into the signal that conventional headphones need. In an adapter with a DAC, that conversion happens inside the adapter itself, which the phone recognises as a small external sound card.
A passive adapter has no electronics: it simply links USB-C contacts to the jack. It only works if the phone offers the analogue audio accessory mode defined in the USB-C specification, which is optional and which most manufacturers have stopped using. If the phone only outputs digital audio, a passive adapter will stay silent however well it fits.
Neither their appearance nor words like "USB-C", "stereo" or "analogue audio" tell them apart: the output to the headphones is analogue in both cases.
Which phones need an adapter with a DAC
- iPhones with USB-C (iPhone 15 and later): they output digital audio over USB, so they need an adapter with a DAC.
- Google Pixel: they require USB-C accessories with a built-in DAC. With a passive adapter they usually show a warning that the analogue audio accessory is not supported.
- Recent Samsung Galaxy phones: the S range from the S20 onwards and the foldables use digital audio over USB-C.
- Laptops and tablets with USB-C (MacBook, iPad with USB-C, Chromebook or PC): an adapter with a DAC works as a standard USB audio device, with nothing to install.
- Some older or entry-level Android phones do accept passive adapters. If in doubt, an adapter with a DAC works with more devices.
Always check the exact model, as there can be differences between generations of the same brand. In USB cables and adapters you will find models with and without a DAC.
How to tell whether an adapter has a DAC
- The product page mentions a DAC, an audio chip or chipset, or digital-to-analogue conversion.
- It lists audio data such as bit depth and sample rate (for example, 24 bit / 48 kHz).
- It states compatibility with USB-C iPhones, Pixel or recent Galaxy phones.
- It says it is meant for devices without their own headphone output.
The AISENS USB-C to 3.5 mm 4-pin jack converter ticks those boxes: a dedicated 24 bit / 48 kHz audio chipset, a 4-pin jack for headsets with a microphone and plug-and-play operation with no drivers.
Microphone and buttons: check them separately
A stereo output is enough for listening. For calls, the adapter must also support microphone input and the headphone jack must have 4 contacts (TRRS). The DAC handles playback: an adapter having one does not by itself guarantee the microphone.
Play, pause and volume buttons depend on the combination of headphones, adapter and operating system. Before relying on it for work, make a test call and record a voice note: music playing well only proves part of the setup.
Listening while charging
An adapter with a single USB-C plug takes up the phone's port. To charge at the same time you need a 2-in-1 adapter with a second USB-C charging socket. That second socket is usually power only: do not expect it to carry data or accept other USB-C headphones.
If your phone needs a DAC, choose a model that combines both. The QGEEM USB-C to 3.5 mm jack audio and PD charging adapter includes 32 bit / 384 kHz audio conversion and a charging socket compatible with Power Delivery 3.0 and Quick Charge 3.0 up to 60 W.
The 2-in-1 USB-C to 3.5 mm jack and USB-C charging adapter provides analogue stereo output and a charging socket, but its product page does not mention a DAC: only choose it if your device supports analogue audio over USB-C.
Fast charging depends on the whole chain: phone, charger, cable and adapter must all support the same protocol and power. If you hear noise when you plug in the charger, try without charging first to find the source.
Table to decide what to buy
| Need | What to look for | What to confirm |
|---|---|---|
| Listening on an iPhone 15 or later, Pixel or recent Galaxy | Adapter with a DAC | Compatibility with the exact model |
| Making calls | DAC with microphone input and 4-pin jack | Test call and recording |
| Using the cable buttons | Controls explicitly supported | Volume, pause and play separately |
| Listening while charging | 2-in-1 adapter with DAC and PD charging | Charging protocol and power |
| Demanding headphones | Adapter output data | Impedance and power recommended by the manufacturer |
Sound quality: buy for how you will actually use it
A DAC does not turn the adapter into a powerful amplifier. For high-impedance studio headphones, check the output data; if the product page does not give it, do not assume any adapter will drive them properly.
Figures such as 384 kHz do not tell the whole story: noise, available level and the headphones themselves matter as much or more. For calls, online classes or listening on public transport, a stable connection and a working microphone count for more.
If the adapter does not work, isolate the fault
- Remove the case if it stops the plug from going all the way in.
- Disconnect Bluetooth headphones or other audio devices that may be receiving the sound.
- Check the volume and the selected audio output with a track you know.
- Try the headphones on another output and the adapter on another compatible device.
- If the microphone fails, record a voice note outside the calling app and check that app's permissions.
If the phone does not recognise the adapter or shows an unsupported accessory warning, the adapter is most likely passive and your phone needs a DAC. If the sound cuts out when you move the cable, there may be a poor contact: do not carry the adapter levering against the port in your pocket.
Mistakes to avoid
- Buying a passive adapter for a USB-C iPhone, a Pixel or a recent Galaxy.
- Reading "analogue audio" on the product page as proof that it has a DAC.
- Assuming the microphone and buttons work because music plays.
- Assuming every 2-in-1 adapter supports fast charging or data.
- Using headphones with a 3-contact jack and expecting the microphone to work.
Frequently asked questions
Do all USB-C to jack adapters have a DAC?
No. Active adapters include a DAC, while passive ones depend on the phone outputting analogue audio over USB-C. They look the same from the outside: check that the product page mentions a DAC, an audio chipset or figures such as 24 bit / 48 kHz.
Which adapter do I need for an iPhone 15 or later?
A USB-C to 3.5 mm jack adapter with a DAC. iPhones with USB-C output digital audio, so a passive adapter will not work. If you will make calls, also check that it supports a microphone.
Does an adapter with a DAC guarantee the microphone works?
No. The DAC handles playback. The product page should mention microphone input or a 4-pin jack, and your headphones need a 4-contact jack. Make a test recording before relying on it.
Can I listen to music and charge at the same time?
Yes, with a 2-in-1 adapter that has a charging socket. If your phone needs a DAC, the adapter must have one too. Charging speed depends on the protocol and power supported by the adapter, the charger and the phone.
Do I need to install an app or drivers?
No. Adapters with a DAC work as standard USB audio on phones, tablets and computers. If the system does not recognise the accessory, check compatibility: no app can add the missing DAC to a passive adapter.