EDIMAX 8-Port Gigabit Long Reach PoE+ Switch with DIP Switch

The Edimax GS-1008P V2 is an eight-port PoE+ Gigabit switch designed for use in home, small or medium-sized network environments.
With eight DIP switches, the PoE ports can be manually configured with on/off control, extending the PoE delivery distance up to 200 meters and port-based on/off control for VLAN and QoS is also supported.
The switch easily connects and supplies power to PoE-enabled devices such as wireless access points, network cameras, and IP phones, as well as other Ethernet-enabled devices such as computers, printers, or network-attached storage (NAS).
The compact size and fanless design make the switch an ideal solution for expanding home and small business networks.

Auto-sensing Power over Ethernet (PoE+)
It features eight IEEE 802.3at Power over Ethernet (PoE+) ports that supply up to 30 watts of electricity per port.
It can convert standard 100 to 240 V AC power into low voltage 50 to 57 V DC electricity to power IEEE 802.3at compliant network accessories over existing LAN cables.
With PoE detection capability, the GS-1008P V2 can check whether the connected device is IEEE 802.3at compliant.
In case no PoE device is detected, only network data will be transmitted via the LAN cable, which means easy setup and management of network devices such as access points and network cameras.

*IP Phone: 3 - 7W, IP Camera: 7 - 10W PTZ Camera: 15 - 25+ W. Access Point: 8W for 802.11a/g radios; 20+W for 802.11n radios
The guidelines are intended to provide general estimates for power consumption. Actual power requirements vary and should be confirmed for each model when determining your PoE budget requirements.

CCTV mode
The unique DIP switch function in CCTV mode is ideal for surveillance network environments.
Turning on all DIP switches enables CCTV mode, which provides multi-function PoE+ data extension, port isolation and QoS on the GS-1008P V2.
When using video surveillance systems for homes, businesses or institutions, CCTV mode provides better speeds for multicast viewing and easier installation.
By turning all DIP switches back to normal, the GS-1008P V2 quickly returns to normal for general-purpose data transmission.

Power and data distance extension
The built-in DIP switch provides extended operating modes on switches 1, 2, 5, 6, and 7.
The GS-1008P V2 operates as a "standard" IEEE 802.at/af PoE switch when the DIP switches are turned off.
With the switches on, the GS-1008P V2 operates per port at 10Mbps full-duplex operation, but can support 30W PoE power output over a distance of up to 200 meters, overcoming the 100m limit of UTP Ethernet cables.
With this brand new feature, the GS-1008P V2 provides an additional solution for 802.3at/af PoE distance extension and saves Ethernet cable installation costs.

Innovative Port-Based VLAN Features
The GS-1008P V2 features port-based VLAN where ports can be isolated from each other via DIP switch ports 3 and 8.
This can help prevent IP camera broadcast or multicast storms from affecting each other.

Hardware QoS for video and voice traffic priority
Supports 802.1p QoS via DIP switch port 4.
This ensures first priority for video and voice traffic.

Plug & Play, no installation required
Simply plug Ethernet or PoE enabled devices into the switch.
Data and power can be transmitted over existing standard Cat-5e Ethernet cables without the need for additional cabling or configuration.
The GS-1008P V2 reduces the difficulty, time and cost of network configuration.

Flexible network deployment and energy efficiency
A quick and effective solution when power outlets are not available for your network devices.
The switch also supports IEEE 802.3az Energy Efficient Ethernet, enabling lower power consumption and reduced costs during periods of low data activity.

Quiet and compact fanless design
A fanless design ensures quiet operation and enables an even more compact design, keeping valuable desk space free in home or small office environments.

Characteristics

• Eight 10/100/1000 Mbps Gigabit PoE+ ports
• IEEE 802.3af/at PoE compliant for simplified deployment and installation.
• Up to 30W per PoE port (total power budget: 130W) to power PoE-enabled devices.
• Automatic detection of powered devices (PD) and power consumption levels.
• Hardware DIP switch for “Standard” and “Extended” mode selection; “Extend” mode features 30W PoE transmission distance of 200m at 10Mbps speed
• Port-based VLAN and loop protection features
• Supports 802.1p Quality of Service (QoS)

Product specifications

• Color: Black
• Materials: Plastic
• Power connector: Euro / Type-C (CEE 7/16)
• Connector Type: RJ45
• Connection: Wired/LAN
• Device Type: Switches
• Network Type: Gigabit
• Switches: 1x RJ45
• Connection output: 8x RJ45
• Number of LAN connections_ 8
• Number of PoE ports: 10